SUNFLEX horizontal sliding wall (HSW)

Sunflex SF40
Frameless with no visible vertical framework, similar to the SF25 glass sliding stack & turn system

Sunflex SF45
Continuous non-thermally broken slim line aluminium is offered with a choice of profiles from the WS (softline/rounded) edge to the WE (square) edge.

Sunflex SF55
The profile is constructed from a strong aluminium extrusion, which has been thermally broken by a 24mm polyamide insulation bar, guaranteeing it optimum resistance to combat heat loss and condensation. The minimal framework is offered as a (WE) square edge profile.

Sunflex SF65
The Sunflex SF65 is manufactured from triple-laminated solid timber sections. These sections have been stabilised at stress points and bonded back together with opposing grains, which creates added strength whilst preventing warping and twisting.

Track
The HSW does not require a bottom track, therefore ensures an uninterrupted floor. Floor sockets will be required to accommodate the shoot bolt locking rods.

Security - Shootbolts
A high level of security is provided as standard, with an effortless, quick, smooth and easy operation. It consists of a top and bottom shoot bolt locking mechanism, which is incorporated into the framework. The shoot bolt rods are manufactured in aluminium and linked by a corrosion resistant cam. They are capped with glass fibre reinforced polyamide cones to prevent any damage to the floor or head track. Each panel interlocks with it neighbouring panels by the means of tongue and groove moulded connecting blocks and continuous gasket seals.

Five-lever key-locking cylinder incorporated within the profile
A five-lever Euro profile cylinder key lock and handles can be fitted to the end lead door or single pass door. These can be fitted to either the inside only or both internally and externally as required, meeting the requirements of the Association of British Insurers. By integrating the locking cylinder into the existing profile in this way eliminates the need for an additional add-on profile familiar with other sub standard systems, ensuring all sightlines remain symmetrically the same.

Weather seals
The top and bottom seals consist of a twin nylon brush piles separated by a twin fin seal, giving an effective seal. The double gasket seals between the door panels are continuous and of superior quality (consisting of long lasting EPDM).

Operating system
The running mechanism consists of double horizontal stainless steel polyamide coated wheels with maintenance free sealed ball bearings providing continued quiet, quick and easy, smooth operation and a long life.

Furniture
Handles and hinges are made of cast alloy, handles are sprung-loaded and flush-fitted to enable door panels to stack flat when fully opened.

Design options
Depending upon the specified door system, designs can be customised according to your preference - the options include mid-rails, mullions, plant-on bars with dummy spacer grids, deeper top and bottom profiles and solid-in fill panels, among many others.