|
|
|
 |
 |
SUNFLEX horizontal sliding wall (HSW) systems
The concept of these systems enables individual
panels to slide to one side of the opening,
leaving a clear, uncluttered space, removing
the physical and psychological barriers between
an inside and outside space. Panels can be
frameless like the SF40 with no visible vertical
framework or framed, depending upon the particular
requirement and based on the SF45, SF55 or
SF65 system types.
These systems offer unrivalled flexibility in design, since the individual panels can be guided to follow corners, curves or any irregular contour. The systems run on a robust top track, which is fixed, into the ceiling. Floor tracks or guide rails are available although not necessary. Enabling continuous flush floor finish whilst preventing any dirt or debris build up, typically associated with having a bottom track. They particularly offer commercial applications a new innovation, allowing the introduction of moveable entrances, internal partitions and display windows.
Chart – The System At A Glance
| Model |
Description |
| Horizontal Sliding Wall (HSW) |
|
| SF40 |
Frameless Glass |
| SF45 |
Non-thermal aluminium
Click here for more details |
SF55 |
Thermally broken aluminium
Click here for more details |
| SF65 |
Timber |
| Horizontal Sliding Wall (HSW) |
| SF40 |
SF45 |
SF55 |
SF65 |
| Glass |
Continuous aluminium |
Thermally broken aluminium |
Laminated timber |
| 40mm |
45mm |
55mm |
65mm |
| N/A |
Rounded (WS) / Square (WE) |
Square (WE) |
N/A |
| 3000mm |
3200mm |
3200mm |
3000mm |
| 1200mm |
1200mm |
1200mm |
1200mm |
| Optional |
Optional |
Optional |
Optional |
| 6-10mm |
WS 20mm
We 24mm |
28mm |
28mm |
Appearance
Sunflex SF40
The supporting rails and track as standard can be finished to a Silver anodised
or polyester powder coated White RAL 9016,
Aluminium RAL 9006, Grey Aluminium RAL 9007
and Anthracite Grey RAL 7016. Other RAL colours
(over 201 RAL colours available) for a nominal
charge. In addition you can specify whether
a matt, semi gloss or full gloss level is
required.
Sunflex SF45 & SF55
The standard available finishes for the Sunflex range of aluminium systems are
Silver anodised or polyester powder coated
White RAL 9016 Aluminium RAL 9006, Grey Aluminium
RAL 9007 and Anthracite Grey RAL 7016. All
handles are specially designed to complement
the door system; standard colours are Black
RAL 9011, White RAL 9016 or Aluminium RAL
9006 Gaskets are in Black with hinges mounted
within seal sightline available in black or
white. A Marine environment finish, that is
required to all systems within 5000m of a
shoreline or chemical swimming pool environment
is also available. Other RAL colours (over
201 colours available). Even different colours
to the inside and outside (dual colour) or
different wood grain effects are available
for a nominal charge. These can even be applied
to the handles if required. In addition you
can specify whether a matt, semi gloss or
gloss level of paint finish is required.
Sunflex SF65/SF68
With the SF65/68, the natural character of wood is perfectly preserved by using
Sikkens micro-porous water based wood stains
(i.e. they contain no harmful solvents) in
a variety of stain colours. Or alternatively
the timber can be paint finished to any RAL
colour (over 201 RAL colours available) or
different colours or wood stain to the inside
and outside. As standard, Sunflex timber door
systems are fully finished, which consists
of one basecoat and two topcoats; other finishes
are available upon request. Each section is
individually dip treated, ensuring equal coverage
over all surfaces, protecting the timber against
rotting and water penetration. The pigmentation
in the treatment protects the timber against
ultra violet rays and discoloration. All handles
are specially designed to complement the door
system; standard colours are Brown RAL 8077,
White RAL 9016 or Aluminium RAL 9006. Gasket
colour available in Brown, Black or White.
|
| Home | Suppliers | Sales
Information | Contact | Site
Map | Site Credit |
|
|
|
|
| |
|
